GLUE FOR MOSAIC TILES

Why We Use Glue For Mosaic Tiles?

If you decide to update the interior of a bathroom or kitchen with the help of such a popular and expensive material today as mosaic tiles, you should take a more responsible approach to this process.

And one of the main questions here: what glue to put on the mosaic? This is mainly due to the high reliability requirements of the adhesion of mosaic elements to the base. Therefore, before gluing the mosaic, pay attention to the choice of adhesive.

For this, one must take into account the operating conditions of the coating, its technical characteristics, assess the type and condition of the surface: what the mosaic can be glued to, and what base is not suitable for this. This is the only way to avoid further delamination of the coating.

As you know, for rooms with a high level of humidity, finishing materials should have good moisture-repellent properties. If you already know how to glue tiles in the bathroom, choose an adhesive solution with improved fixation, as well as higher hydrophobic properties.

Another of its important qualities is elasticity, which allows mosaics to be placed on curved surfaces. And since we are dealing with a group of glassy materials with low porosity, then, accordingly, the answer to the question: “What glue should be used to glue the mosaic?” obvious — in glue with high adhesion, which guarantees a strong adhesion of the coating to the base.

HOW TO STICK MOSAIC TILES ON THE WALLS?

One more important point should be considered — how to glue a mosaic tiles on the wall. In this case, a white mix is ​​recommended so that the translucent coating does not acquire unwanted shades.

The mortar must be of a thick consistency, with texatropic qualities, which ensure that the coating is resistant to slippage. However, it is worth remembering that before gluing the marble look mosaic tiles to the wall, you need to prepare the surface itself.

It should be flat, clean and dry. The adhesive composition can soften the minor roughness of the base; for more serious defects, it is better to use special leveling mixtures. The admissible air temperature in the room is from +5С to +30С.

In any video on how to glue a mosaic tile, you can see that first you need to draw the surface to be faced in squares that will correspond in size to the mosaic modules. This precise geometry will help make all the seams as even as possible, so that the floor looks like a single mosaic carpet.

WHAT GLUE IS NEEDED FOR A MOSAIC TILES?

In each case, the choice is individual. For example, glass mosaic tiles require a special white glue. The consistency of the glue should be optimal (thick rustic sour cream) to hold the mosaic module on a vertical surface.

The mosaic adhesive is applied with a spatula with a notch size of 3 to 3.5 mm, on a wall section not exceeding the size of 6–9 modules. If the technology called “paper” is chosen, the modules are glued together with mosaic tiles, the paper must face outwards.

It is convenient to press the module from the paper side with a normal rubber roller for wallpapering. After the sequential laying of a certain section of the wall, it is necessary to moisten the paper of the mosaic modules with a damp sponge and remove the paper backing.

Conclusion

Finally, I would like to say that when choosing which glue to glue the mosaic tiles, be sure to follow the manufacturers’ advice. Use only special mosaic adhesives, do not try to save a few rubles, remember that the miser pays twice.

For the maintenance of the mosaic tiles, it is better to use neutral detergents recommended by the manufacturers. When cleaning stubborn dirt, use detergents with low acid content, remembering to rinse the treated area with plenty of water.